About Us |
Founder / CEO: Ghazala Miftah
ghazalamiftah@dexign3d.com
ghazalamiftah@dexign3d.com
Dexign 3D Established in 2014
Dexign 3D was founded by Ghazala Miftah in 2014 as an independent consulting company. In 2016, she envisions the idea of IDS (Innovative Design System), a new and second option for the AEC industry project delivery and then the mission of Dexign 3D was defined. IDS is reinventing project delivery for the AEC industry incorporating high-end and innovative technologies.
Dexign 3D’s mission, in its simple words, is to upgrade the AEC (Architecture, Engineering, Construction) industry in high-end and innovative technologies by saving extensive capital wasted annually in the current process through its platform IDS, Innovative Design System while making every building on this planet net zero emission building.
Why IDS (Innovative Design System)?
The idea was shared with AEC industry professionals and their general response was why IDS is needed when there is already existing system in place for last two decades?
In reality, the system that is in place is not adapted well even in two decades. Still, work is ongoing to make this system updated with the current advancements in technologies, but the foundation was not designed for that as back then these technologies were not popular and in practice. New foundation, new approach and new vision was crafted in the form of IDS, to create another option for the users who have no second and effective option available at this time.
“It’s like boiling an ocean. This is a very giant project in its scale and complexity. It’s tough to create a plan and execution strategy”. AEC professional comment on Project IDS.
From idea to actual master plan of IDS was quite a tough journey for the founder. Advanced level 1 industry research was conducted, and the real issues were identified: the AEC industry wasted capital annually due to current project delivery is billions of dollars.
Some major issues are persistent regardless of improvements made in the existing project delivery process: IDS is introducing climate smart solution for the AEC industry as an important ingredient of project delivery with an innovation of new technology C-MG.
Complexity in project design delivery, mistakes in design documents, unclear & inadequate details in drawings, delay in preparation of shop drawings, poor coordination between consultant and other parties, poor coordination between contractor and other parties, misunderstanding of owner requirements by design engineers, poor risk management and supervision, delay in approving and review of design documents, poor coordination between owner and other parties, frequent change of sub-contractors, difficulties in financing project by contractor, improper planning and scheduling, contactor excessive workload, poor quality management, shortage of unskilled labor, issue of permits by council and concerning authorities, change in regulations and laws by government, corruption, time delays, higher expenses, information display errors, incorrect data transfers, human errors and much more.
IDS is a new AEC industry standard.
A quick look at the AEC industry progress through all these years and the future forecast.
1950 | Hand drawings
1960 | CAD
1970 | CAD Upgrades
1980 | Parametric Design
2000 | BIM (The current system for last two decades)
2010 | Algorithmic Modeling
2020 | Interoperability, Photogrammetry, AI-BIM, Generative Design, Digital Twin, Laser Scanning, Robotic Construction, IoT
2022 and Beyond
IDS (New System for AEC Project Delivery)
IDS Major Platforms:
I-BOT Series (Intelligent BOTS)
GLM (IDS Language Model)
OS-GO (Project Delivery Communication)
CL-DG( Process Monitoring)
Conclusion
Sharing this information with our audience is important to make mission of Dexign 3D more obvious and clearer.
There is reassessment currently going on inside of AEC firms in their approach to digital tools. The search for a full digitization of the process from conceptual to life cycle of project is still going on with no off-the-shelf solution that fully satisfies the need and experience of the AEC professionals.
2022 and beyond is bringing a second option of IDS system in the AEC industry incorporating latest and innovative high-end technology solutions for exceptional user experience, the current project delivery process, and moving the industry a step forward.
Dexign 3D is executing this digital transformation of the AEC industry through its platform of IDS (Innovative Design System) with the introduction of I-BOTS (Intelligent BOT Series) and GLM (a new function technology) incorporating high precision technology and data intelligence.
Smart buildings designed in an intelligent system makes a big difference.
Ancillary Revenue Strategy
Dexign 3D ancillary revenue strategy recently put in place is from other services including Printers & IT Technical Support, and Digital Art Gallery for digital marketing services that differ from the main services or product lines of the company. Check out the website for more information.
Dexign 3D was founded by Ghazala Miftah in 2014 as an independent consulting company. In 2016, she envisions the idea of IDS (Innovative Design System), a new and second option for the AEC industry project delivery and then the mission of Dexign 3D was defined. IDS is reinventing project delivery for the AEC industry incorporating high-end and innovative technologies.
Dexign 3D’s mission, in its simple words, is to upgrade the AEC (Architecture, Engineering, Construction) industry in high-end and innovative technologies by saving extensive capital wasted annually in the current process through its platform IDS, Innovative Design System while making every building on this planet net zero emission building.
Why IDS (Innovative Design System)?
The idea was shared with AEC industry professionals and their general response was why IDS is needed when there is already existing system in place for last two decades?
In reality, the system that is in place is not adapted well even in two decades. Still, work is ongoing to make this system updated with the current advancements in technologies, but the foundation was not designed for that as back then these technologies were not popular and in practice. New foundation, new approach and new vision was crafted in the form of IDS, to create another option for the users who have no second and effective option available at this time.
“It’s like boiling an ocean. This is a very giant project in its scale and complexity. It’s tough to create a plan and execution strategy”. AEC professional comment on Project IDS.
From idea to actual master plan of IDS was quite a tough journey for the founder. Advanced level 1 industry research was conducted, and the real issues were identified: the AEC industry wasted capital annually due to current project delivery is billions of dollars.
Some major issues are persistent regardless of improvements made in the existing project delivery process: IDS is introducing climate smart solution for the AEC industry as an important ingredient of project delivery with an innovation of new technology C-MG.
Complexity in project design delivery, mistakes in design documents, unclear & inadequate details in drawings, delay in preparation of shop drawings, poor coordination between consultant and other parties, poor coordination between contractor and other parties, misunderstanding of owner requirements by design engineers, poor risk management and supervision, delay in approving and review of design documents, poor coordination between owner and other parties, frequent change of sub-contractors, difficulties in financing project by contractor, improper planning and scheduling, contactor excessive workload, poor quality management, shortage of unskilled labor, issue of permits by council and concerning authorities, change in regulations and laws by government, corruption, time delays, higher expenses, information display errors, incorrect data transfers, human errors and much more.
IDS is a new AEC industry standard.
A quick look at the AEC industry progress through all these years and the future forecast.
1950 | Hand drawings
1960 | CAD
1970 | CAD Upgrades
1980 | Parametric Design
2000 | BIM (The current system for last two decades)
2010 | Algorithmic Modeling
2020 | Interoperability, Photogrammetry, AI-BIM, Generative Design, Digital Twin, Laser Scanning, Robotic Construction, IoT
2022 and Beyond
IDS (New System for AEC Project Delivery)
IDS Major Platforms:
I-BOT Series (Intelligent BOTS)
GLM (IDS Language Model)
OS-GO (Project Delivery Communication)
CL-DG( Process Monitoring)
Conclusion
Sharing this information with our audience is important to make mission of Dexign 3D more obvious and clearer.
There is reassessment currently going on inside of AEC firms in their approach to digital tools. The search for a full digitization of the process from conceptual to life cycle of project is still going on with no off-the-shelf solution that fully satisfies the need and experience of the AEC professionals.
2022 and beyond is bringing a second option of IDS system in the AEC industry incorporating latest and innovative high-end technology solutions for exceptional user experience, the current project delivery process, and moving the industry a step forward.
Dexign 3D is executing this digital transformation of the AEC industry through its platform of IDS (Innovative Design System) with the introduction of I-BOTS (Intelligent BOT Series) and GLM (a new function technology) incorporating high precision technology and data intelligence.
Smart buildings designed in an intelligent system makes a big difference.
Ancillary Revenue Strategy
Dexign 3D ancillary revenue strategy recently put in place is from other services including Printers & IT Technical Support, and Digital Art Gallery for digital marketing services that differ from the main services or product lines of the company. Check out the website for more information.
About the Founder
Dexign 3D was founded by Ghazala Miftah in 2014 as an independent consulting company until she envisions the concept of project IDS (Innovative Design System) in 2016. This concept is proprietary to Dexign 3D and built upon input from leading architects that Ghazala has researched.
Ghazala has studied Architecture (1990 - 1996) and Media Arts & Animation (2007 - 2012) and combined these two professions in the form of Dexign 3D. Her knowledge on latest technologies was a great incentive in developing the master plan of IDS (Innovative Design System).
IDS is a new vision, approach, and standard for project delivery in AEC (Architecture, Engineering Construction) industry incorporating high-end technologies.
Ghazala is married for 27 years and lives with her husband and two children in Irvine, CA for 22 years. She has moved to USA from Pakistan in 1997.
Besides working on building design projects in architecture industry, she is an artist who has worked on multiple medias including watercolors, oil paints and many digital platforms. She has experience in 3D modeling and animations including short character animated films. Ghazala has written books for children and two of them are available on Amazon. Check out her digital art gallery on the website for recent work.
Her favorite quote is “In the world where you can be anything, be kind”.
Dexign 3D was founded by Ghazala Miftah in 2014 as an independent consulting company until she envisions the concept of project IDS (Innovative Design System) in 2016. This concept is proprietary to Dexign 3D and built upon input from leading architects that Ghazala has researched.
Ghazala has studied Architecture (1990 - 1996) and Media Arts & Animation (2007 - 2012) and combined these two professions in the form of Dexign 3D. Her knowledge on latest technologies was a great incentive in developing the master plan of IDS (Innovative Design System).
IDS is a new vision, approach, and standard for project delivery in AEC (Architecture, Engineering Construction) industry incorporating high-end technologies.
Ghazala is married for 27 years and lives with her husband and two children in Irvine, CA for 22 years. She has moved to USA from Pakistan in 1997.
Besides working on building design projects in architecture industry, she is an artist who has worked on multiple medias including watercolors, oil paints and many digital platforms. She has experience in 3D modeling and animations including short character animated films. Ghazala has written books for children and two of them are available on Amazon. Check out her digital art gallery on the website for recent work.
Her favorite quote is “In the world where you can be anything, be kind”.